WEW27-CC
Please do not hesitate to contact us to obtain More Information.
- Free Warehouse Pickup Available
- Safe Shipping & DeliveryMore Details
- Secure Payment
Price
$224.10 Each
- N/A
Available on backorder
Technical Details
Dimensions
Moments
Dimensions
H | Total height | 27 | mm |
H1 | 4 | mm | |
N | 19 | mm | |
W | Block width | 80 | mm |
B | 70 | mm | |
B1 | 5 | mm | |
C | 40 | mm | |
L1 | 51.8 | mm | |
L | Block length | 72.8 | mm |
K1 | 10.15 | mm | |
K2 | 3.5 | ||
G | 12 | mm | |
M | M6 | ||
T | 8 | mm | |
T1 | 10 | ||
H2 | 6 | mm | |
H3 | 5 | ||
Mass | 0,43 | kg |
Load ratings and torques
Cdyn | Dynamic load rating | 12.400 | N |
C0 | Static load rating | 21.600 | N |
M0X | Static moment | 420 | Nm |
M0Y | Static moment | 170 | Nm |
M0Z | Static moment | 170 | Nm |
Details
Load ratings
Static load rating C0
If a linear guideway system is subjected to excessive loads or impacts during movement or at a standstill, localised permanent deformation occurs between the track and balls. As soon as this permanent deformation exceeds a certain level, it affects smooth operation of the guideway. According to its basic definition, the static load rating corresponds to a static load that causes permanent deformation of 0.0001 × ball diameter at the contact point that is loaded the most. The values are given in the tables for each linear guideway system. Using these tables, the designer can select a suitable linear guideway system. The maximum static load to which a linear guideway system is subjected must not exceed the static load rating.
Permissible static moment M0
The permissible static moment is the moment which, in a defined direction and size, corresponds to the maximum possible load on the moving parts by the basic static load rating. The permissible static moment is defined for linear motion systems for three directions: MX, MY and MZ.
Coating
HIWIN coating HICOAT CTS
HICOAT CTS is a thin layer chrome coating that offers good corrosion protection and a very high wear protection. The high wear protection results from the extraordinary hardness of the coating. The CTS coating is free of Cr(VI) and suitable for use in food stuffs. It is available for the HG, EG, CG and WE series. Further information can be found in the catalogue “Linear Guideways” under chapter “HIWIN coatings for linear guideways”.