fbpx

Please do not hesitate to contact us to obtain More Information.

Price

$253.80 Each

Type : WEW21CCZ0C

10 in stock (can be backordered)

Technical Details

Dimensions

Moments

Dimensions

 H   Total height  17  mm
 H1  2,5  mm
 N  13,5  mm
 W  Block width  68  mm
 B  60  mm
 B1  4  mm
 C  29  mm
 L1  41,7  mm
 L  Block length  59  mm
 K1  9,68  mm
 K2  3,65
 G  12  mm
 M  M5
 T  7,3  mm
 T1  8
 H2  4,5  mm
 H3  4,2
 Mass  0,23  kg

 

Load ratings and torques

 Cdyn  Dynamic load rating  7.210  N
 C0  Static load rating  13.700  N
 M0X  Static moment  230  Nm
 M0Y  Static moment  100  Nm
 M0Z  Static moment  100  Nm

Load ratings

Static load rating C0

If a linear guideway system is subjected to excessive loads or impacts during movement or at a standstill, localised permanent deformation occurs between the track and balls. As soon as this permanent deformation exceeds a certain level, it affects smooth operation of the guideway. According to its basic definition, the static load rating corresponds to a static load that causes permanent deformation of 0.0001 × ball diameter at the contact point that is loaded the most. The values are given in the tables for each linear guideway system. Using these tables, the designer can select a suitable linear guideway system. The maximum static load to which a linear guideway system is subjected must not exceed the static load rating.

 


 

Permissible static moment M0

The permissible static moment is the moment which, in a defined direction and size, corresponds to the maximum possible load on the moving parts by the basic static load rating. The permissible static moment is defined for linear motion systems for three directions: MX, MY and MZ.

 


 

Coating

HIWIN coating HICOAT CTS

HICOAT CTS is a thin layer chrome coating that offers good corrosion protection and a very high wear protection. The high wear protection results from the extraordinary hardness of the coating. The CTS coating is free of Cr(VI) and suitable for use in food stuffs. It is available for the HG, EG, CG and WE series. Further information can be found in the catalogue “Linear Guideways” under chapter “HIWIN coatings for linear guideways”.

 Product  Category  Size Document
 Linear guideways  Project planning sheet  0.17 MB  Download
 Linear guideways  Assembly Instructions  5 MB  Download
 Linear guideways  Catalogue  7 MB  Download
 Step File    Download
Sign in

No account yet?

Shop
Wishlist
0 items Cart
My account

Shipping Policy

Orders placed before 5 p.m. for which all items are in stock at the distribution center will be shipped the same day.

Estimated transit times

Items in stock at the manufacturer

The times provided are averages based on our experience and should only be used as a guide. Actual delivery time for items stocked by the manufacturer may differ from the times stated for reasons beyond our control.

Expedited shipments are possible and handled on a case-by-case basis. Please contact us for more information.

JOIN WIth MTI Automation

GET 15% OFF

YOUR FIRST PURCHASE

Plus! FREE SHIPPING ON ORDERS OVER $500

When you sign up for our newsletter.

Offer available for first-time sign-ups only. You’ll receive exclusive insights, updates on the latest automation tools, and personalized tips from MTI Automation.

Please correct the marked field(s) below.

*Sometimes the coupon code email might end up in your spam or junk folder, so please check there as well.