MGN7-C
Please do not hesitate to contact us to obtain More Information.
- Free Warehouse Pickup Available
- Safe Shipping & Delivery
- Secure Payment
Price
$56.70 Each
- N/A
Available on backorder
Technical Details
Dimensions
Moments
Dimensions
| H | Total height | 16 | mm |
| H1 | 4 | mm | |
| H1 | With bottom seal | 3 | mm |
| N | 8,5 | mm | |
| W | Block width | 32 | mm |
| B | 25 | mm | |
| B1 | 3,5 | mm | |
| C | 20 | mm | |
| L1 | 26,7 | mm | |
| L | Block length | 42,1 | mm |
| G | 4,5 | mm | |
| Gn | M3 | ||
| M | M3 | ||
| l | 4 | mm | |
| H2 | 3 | mm | |
| Mass | 0,06 | kg |
Load ratings and torques
| Cdyn | Dynamic load rating | 4.610 | N |
| C0 | Static load rating | 5.590 | N |
| M0X | Static moment | 45,1 | Nm |
| M0Y | Static moment | 21,6 | Nm |
| M0Z | Static moment | 21,6 | Nm |
Details
Load ratings
Static load rating C0
If a linear guideway system is subjected to excessive loads or impacts during movement or at a standstill, localised permanent deformation occurs between the track and balls. As soon as this permanent deformation exceeds a certain level, it affects smooth operation of the guideway. According to its basic definition, the static load rating corresponds to a static load that causes permanent deformation of 0.0001 × ball diameter at the contact point that is loaded the most. The values are given in the tables for each linear guideway system. Using these tables, the designer can select a suitable linear guideway system. The maximum static load to which a linear guideway system is subjected must not exceed the static load rating.
Permissible static moment M0
The permissible static moment is the moment which, in a defined direction and size, corresponds to the maximum possible load on the moving parts by the basic static load rating. The permissible static moment is defined for linear motion systems for three directions: MX, MY and MZ.
Heat-resistant linear guideways
Solid steel block SE
For continuous operation at temperatures above 80 °C, solid steel blocks with steel deflection systems are used. The standard end seals are replaced by heat-resistant end seals and the plastic cover caps of the profile rail by brass cover caps.
