SACC-M 8FS-3CON-M-SW – Connector

N'hésitez pas à nous contacter pour obtenir plus d'informations.

Demander un devis

Phoenix Contact

Prix

$100.00

Type : L9-0.5/2/C-1
  • Délai : 7-14 jours

Détails
Connector, Universal, 3-position, Socket straight M8, coding: A, Screw connection, knurl material: Brass, nickel-plated, external cable diameter 3.5 mm … 5 mm
Product type Circular connector (cable-side)
Sensor type Universal
Number of positions 3
No. of cable outlets 1
Shielded no
Coding A
Cable outlet straight

Data management status

Article revision 02

Insulation characteristics

Overvoltage category III
Degree of pollution 3

Dimensions

Width 12 mm
Height 12 mm
Length 45 mm
Outside diameter 3.5 mm … 5 mm
Diameter housing 12 mm

Material Specifications

Flammability rating according to UL 94 HB
Seal material NBR
Material of grip body PBT
Contact material CuZn
Contact surface material Au
Contact carrier material PA
Material for screw connection Brass, nickel-plated

Connection data

Connection method Screw connection
Connection cross section
  • 0.14 mm² … 0.5 mm² (without ferrule)
  • 0.14 mm² … 0.5 mm² (with ferrule)
  • 0.14 mm² … 0.5 mm² (solid)
Connection cross section AWG 26 … 20 (without ferrule)
Stripping length of the individual wire 4 mm
Tightening torque 0.2 Nm (M8 knurl)

0.5 Nm (Connector with coupling sleeve)

0.3 Nm … 0.4 Nm (Pressure screw for outer cable diameter 3 mm … 4 mm)

0.8 Nm … 1 Nm (Pressure screw in the case of external cable diameter 4 mm … 5 mm)

0.1 Nm (Screw terminal blocks)

Electrical Properties

Rated surge voltage 1.5 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 48 V AC , 60 V DC
Nominal current IN 4 A

Mechanical data

Insertion/withdrawal cycles ≥ 100

Connection 1

Head design Socket
Head cable outlet straight
Head thread type M8
Coding A

Cable / Line

Signal type/category Universal
Stripping length of the individual wire 4 mm

Ambient conditions

Degree of protection IP67
Ambient temperature (operation) -40 °C … 85 °C (Plug / socket)

Standards and regulations

Standard designation M8 connector
Standards/specifications IEC 61076-2-104